Product Details
New Page 1

Set pack of MR-999 ROBOT ARM and IF-100 MOVIT-LAB II



MR-999 ROBOT ARM can perform such actions as to grab, release, lift, lower, rotate wrist and pivot sideways for 350 degrees as you command with a wired controller. ROBOT ARM introduces the basic robotic sensing and movement principles. The semi-transparent arm and LED lights allow you to observe the gear mechanism and the robot's movement in detail.



Power Source: "D" Battery x 4 (not included)

Power Consumption (per each Unit): 300mA (no-load)

Lifting Capacity: 130g

Weight: Robot Arm Approx.1,050g (without Batteries), Control Box Approx.15(including cable)

Size: Max. height upwards 510mm, Max. length outwards 360mm



Connect this IF-100 MOVIT-LAB II Interface Board to your PC and either to ROBOT ARM, then the robot is at your command!;

For ROBOT ARM, controlling, creating and editing a program can be done. The exclusive and user-friendly software is downloadable from ELEKIT website free of charge.



Power Voltage: DC5V (USB bus power)

Power consumption: Approx.250mA (max.)

Size: W100xD90xH38mm

Accessory: USB cable

* When your PC has a USB hub, it is possible there is insufficient power capacity. In such case, please use DC5V of external power supply with approx.500mA. When using an external power supply, connect the terminals to "GND" and "+5V" of the Interface Board and set SW1 to "EXT".


 [System requirements for MOVIT-LAB II]

OS: Windows ®XP Service Pack 2 / VISTA ® / 7(32bit only)

CPU: Intel ®Pentium III, 1.0GHx or higher

MEMORY: 256MB or higher

Disk space more than 100MB

DISPLAY: Super VGA (800x600) or higher

Color monitor with high color 16 bits or higher

.NET FRAMEWORK: Microsoft ®.NET Framework 2.0 or higher


* When the above application is not installed, download from Microsoft ®homepage and install.

* Windows ®is a registered trademark of Microsoft Corporation in the United States and/or other countries.


Select your Style/Color:
Select your Quantity & Size
© Copyright 2009. All rights Reserved.

powered by JEMI Systems, LLC